APDS9306 Sensor

Component

The apds9306 sensor component allows you to use APDS9306 ambient light sensors (datasheet, Broadcom) with ESPHome. The I²C is required to be set up in your configuration for this sensor to work.

../../_images/apds9306.png

Image by Broadcom

# Example configuration entry
sensor:
  - platform: apds9306
    name: "APDS9306 Light Level" # below are optional
    gain: 1
    bit_width: 18
    measurement_rate: 100ms
    update_interval: 60s

Configuration variables:

The apds9306 sensor allows you to use your APDS9306 Sensor to perform ambient light measurements.

  • address (Optional, int): The I²C address of the sensor. Should be 0x52 according to datasheet (“Contact factory for other addressing options”).

  • gain (Optional, int): The gain of the ambient light sensor. One of 1, 3, 6, 9, 18. Defaults to 1.

  • bit_width (Optional, int): The bit width/resolution of the ambient light sensor. One of:

    • 20 - takes 400ms

    • 19 - takes 200ms

    • 18 - takes 100ms (default)

    • 17 - takes 50ms

    • 16 - takes 25ms

    • 13 - takes 3.125ms

  • measurement_rate (Optional, int): The measurement rate of the ambient light sensor in milliseconds. One of:

    • 25

    • 50

    • 100 (default);

    • 200

    • 500

    • 1000

  • update_interval (Optional, Time): The interval at which the sensor reading will be updated. Defaults to 60s.

  • All opther options from Sensor.

See Also