AHT10 Temperature+Humidity Sensor¶
The aht10
Temperature+Humidity sensor allows you to use your AHT10
(datasheet), AHT20 (datasheet) or AHT30 (datasheet) I²C-based sensor with ESPHome.
The DHT20 (datasheet) sensor has the packaging of the DHT Temperature+Humidity Sensor series, but has the AHT20 inside and is speaking I²C as well.
![../../_images/aht10-full.jpg](../../_images/aht10-full.jpg)
AHT10 Temperature & Humidity Sensor.¶
![../../_images/temperature-humidity.png](../../_images/temperature-humidity.png)
Note
When configured for humidity, the log ‘Components should block for at most 20-30ms in loop().’ will be generated in verbose mode. This is due to technical specs of the sensor and can not be avoided.
# Example configuration entry
sensor:
- platform: aht10
variant: AHT10
temperature:
name: "Living Room Temperature"
humidity:
name: "Living Room Humidity"
update_interval: 60s
Configuration variables:¶
variant (Optional, enum): Set the variant of the device in use. Defaults to
AHT10
.AHT10
- For AHT10 devices.AHT20
- For AHT20 and AHT30 devices.
temperature (Required): The information for the temperature sensor.
All options from Sensor.
humidity (Required): The information for the humidity sensor
All options from Sensor.
update_interval (Optional, Time): The interval to check the sensor. Defaults to
60s
.