LightWaveRF

The LightWaveRF light platform creates a module to dump and send commands to light switches

../_images/lightwaverf.jpg

LightwaveRF switches are very common in UK automation. They allow control of lights, sockets, relays and more via RF remote or via a hub. Using an inexpensive RF transmitter and receiver you can control your devices via ESPHome.

# Example configuration entry

# Specify the two pins to connect the receiver and transmitter
lightwaverf:
  read_pin: GPIOXX
  write_pin: GPIOXX

Note: To gather the RAW codes from the remote, setup the read_pin and observe in the logs the printing of the codes.

Configuration variables:

  • read_pin (Required, Pin Schema): The pin that the receiver is connected to

  • write_pin (Required, Pin Schema): the pin that the transmitter is connected to

lightwaverf.send_raw Action

Send the raw data that has been captured via the dump system

on_...:
  then:
    - lightwaverf.send_raw:
        code:  [0x04, 0x00, 0x00, 0x00, 0x0f, 0x03, 0x0d, 0x09, 0x08, 0x08]
        name: "Sofa"
        repeat: 1

Configuration variables:

  • name (Optional, string): The name to give for the action

  • code (Required, list hex): The raw dump in an array of hex

  • repeat (Optional, int): The number of times the message will be repeated

  • inverted (Optional, boolean): Send the signal inverted

Compatible Hardware

The RF transmitters/receivers listed below have been confirmed to work with the current code base. If you discover others that work, please let us know!

Compatible transmitter:

  • MX-FS-03V

Compatible receiver:

  • RXB6

See Also